Gingerbread - DTF Transfer

Printed DTF transfer sheet used for fabrics and soft furnishings. 

DTF is a direct to garment transfer. Turn any image into a transfer today and see why this is taking over the sublimation industry. DTF is an exciting addition to any garment. 

We recommend the following steps to transfer your transfers. Please note, these are a guide and if you need to seek some advice before hand, please get in touch. 

1. Heat or iron the area of where your transfer is going to be applied. This will remove any creases and will give a better finish.
2. You'll need a medium heat setting for best application. 150°C to 160°C for Heat Presses / Handheld. 
3. Place your transfer on the area you wish to apply and make sure your heat press has medium to high pressure. If using handheld, apply as much pressure as you can for best results. 
4. Press for approx. 15 seconds or about 20 - 30 seconds with a handheld, making sure you cover all areas in a moving motion. 
5. Before you peel of the transfer, gently peel back a corner to see the application. If it hasn't fully transferred, apply pressure again for a few more seconds. 
6. Once fully transferred. Let the graphic COOL before you peel off the top layer. 
7. Press again once transfer paper removed to 'seal'. Recommend to use Teflon / baking paper to protect garment. 

Care Tips; 

You may wash your garments inside out on a 'cool' wash and do not directly iron. If you need to, turn garment inside out and gently iron but not directly onto transfer area.